5
2� For Sloped or Diamond-shaped Roof
The Sensor should be kept at a certain distance from the roof; when the roof slope is less than 30 degrees, the appropriate
distance is 500mm.
Forbidden Zone
500mm
Sensor Installation
1� Screw Fixed (Recommended)
1�
Stick the drilling template onto a clean and flat ceiling surface.
2�
(For cement wall only) Drill screw holes according to the template, and insert anchors.
3. Align the U-shaped holes corresponded to the amounting base to anchors, and then fix the mounting base with the screws.
4. Rotate the Sensor clockwise to completely lock the buckles of the Sensor and the lock grooves on the mounting base.
5. The installation is finished.
Drill Location Template
Anchor
Mounting Base
Screws
2� Foam Sticker Fixed
1. Paste the foam sticker on the mounting base.
2. Remove the protect film on the foam sticker to fix the mounting base on the ceiling surface.
3. Rotate the Sensor clockwise to completely lock the buckles of the Sensor and the lock grooves on the mounting base.
4. The installation is finished.