31
www.CurrieTech.com
Currie Technologies
®
fLAT TIRE REPAIR
fRONT WHEEL
4.0 AND 400 SERIES SCOOTERS
To remove the front wheel refer
1.
to page 24 then proceed to step
2.
With two 17mm wrenches loos-
2.
en the lock nuts on both sides
of the axle. (Ref Photo A)
Remove one of the lock nuts
3.
and axle spacers. Remove the
axle from the wheel.
With a 5mm hex key wrench
4.
remove all three bolts that hold
the two halves of the wheel
together. (Ref Photo B)
Separate the rim halves to
5.
remove the tire and tube. (Ref
Photo C)
Remove tube from tire.
6.
Slightly inflate the tube in order
7.
to inspect for leaks or punc-
tures. Patch or replace the tube
as necessary.
Carefully check the inside of
8.
the tire and remove any sharp
objects or debris that caused
the puncture. If the tire is cut
through in any place replace it
To reassemble the front wheel,
9.
first slightly inflate the tube
to allow it to take shape, then
install into the tire.
Place the valve at the notch
10.
(Ref Photo D) in one half of the
rim. Be sure to align the valve
and valve notches at the center
of the rim to insure proper as-
sembly. Be sure to point the
valve away from the brake disc
Photo A
Photo C
Photo B
Photo D
