16
Customer Service 1-800-377-4532
Currie Technologies
®
using the Currie “Smart Charger”, we
recommend that you do not leave the
charger plugged in for more than 24
hours.
CHANGING THE bATTERY PACk
I
1.
MPORTANT
: Be sure the
power switch on the scooter is
in the “OFF” position.
Remove the deck by unscrew-
2.
ing the “D” ring deck retention
screw then lifting the deck off.
(Ref Photo A)
Remove the battery pack out of
3.
the scooter’s battery tray. (Ref
Photo B)
Disconnect the battery power
4.
pack connector (cut zip tie
holding the wire connector, if
necessary) (Ref Photo C)
Place the new or fully charged
5.
battery pack into the battery
tray.
Reconnect the battery pack
6.
connector and place all of the
cables into the tray.
Re-install the deck and secure
7.
with the “D” ring deck retention
screw.
Photo A
Photo B
Photo C
