12
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
won’t occur again unless the heater is un-used for a long period of time.
NOTICE
To improve operation,
aim
the remote control at the front of the fireplace.
DO NOT
press the buttons too quickly
. Give the unit time to respond to each command.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2.
Turn the ON/OFF switch on the CONTROL PANEL to OFF.
Wait 5 minutes.
3. Inspect the fire unit and make sure all vents are free from dust or lint. If they are clogged, use a
vacuum to clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord back into the outlet.
5. If the problem continues, have your outlet and wiring inspected by a professional.
Remote Control Battery Information
•
This remote control uses
Two AAA batteries
(
NOT
included).
NEVER
dispose of batteries in
fire.
Failure to observe this precaution
may result in
explosion
.
Dispose of batteries at your local hazardous material processing center.
