7
Fuel-bed effect installation
1.
The appliance must be installed in its final location before the crystals, artificial logs and charred
wood flakes are installed.
2.
Remove the glass front and safely store it to one side for now.
Figure 1.
3.
Disperse the crystals evenly on the fuel-bed tray in a side-to-side motion.
Figure 2.
Next, using
the same side to side technique, disperse the majority of the charred wood flakes onto the surface of
crystals. Save some for later.
4.
Place the artificial logs on the surface of the crystals.
Figure 3.
To enhance the bed further,
disperse the remainder of the charred wood flakes in and around each log.
5.
Finally, when content with your fuel-bed, re-fit the glass screen, switch the fire on and relax.
Figure 1. Figure 2.
Figure 3.
