10
HEATER
HEATER button
: Turns heater on and off.
NOTE:
The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE:
To prevent overheating, the heater
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
NOTE:
Heater overrides room temp
control.
1.
Press once
, indicator light (H1) turns on.
Fan blows cool air for 10 seconds. Low
heat (H1) turns on and blows warm air.
2.
Press again
, indicator light changes to
H2. High heat (H2) turns on and blows
hot air.
3.
Press again,
indicator light turns off. Fan
blows cool air for 10 seconds, then turns
off.
TIMER SETTINGS ON REMOTE CONTROL
: Timer:
Displays current day, time, and week. Press to enter
or confirm timer settings.
:
Settings:
Press to move to next step. Press to confirm week
timer.
:
Back:
Press to clear timer settings. Press to return to the
previous step.
:
Up and Down
Press to increase/ decrease certain settings.
LCD Screen
Weekday
Mon, Tues, Wed, Thurs, Fri, Sat, Sun
Note:
The functions can
only be adjusted when the
related letters or digits are
flashing.
Note:
Calibrate the timer
to current time before
entering the weekly
settings.
Time Display
Current Time / Timer From 00:00 to 24:00
NOTE: 00-12:00 is AM / 13:00-24:00 is PM
TEMP
TEMPERATURE button:
Turns heater on
and off to maintain room at a certain
temperature automatically.
NOTE:
Press & hold the button for 5
seconds, the temperature setting will
switch from
℃
to
℉
and vice versa.
P 1.
Press once,
indicator light turns on.
Temperature is preset at 18
℃
.
1. 2.
Press again,
until desired room
2.
temperature is selected.
