EZDigiMagic DM220-D08E, User Manual

Page: 40 / 90

(12) Compare after Burn
Once “After Success” appears on the screen in setup menu 4-5, the option
“Compare After Burn” can be selected by using the right arrow key (►). In
this mode, the DM220-P08/BD will automatically compare data between the
source and target after the burning is completed.
NOTE: Using the left arrow key (◄), select “No” within 5 seconds to
abort if “Compare After Burn” is not preferred. The “Compare After
Burn” feature will automatically proceed after 5 seconds if no selection
is made.
(13) Once the burning is completed, the status will be shown on the display. If
the “Auto Tray Out” option is set in the device setup, the disc tray will eject
automatically; otherwise the user must press the eject button to remove
the disc.
(14)
If the Copy Select sub-option is selected, then the user must use the SET
key to select the files or folders for copying. However, the user can only
select one folder or file at a time for this operation.
14
Figure 12
Figure 13