7
INTRODUCTION
NOTE
All material in this manual applies to the DM-530SRS unless otherwise indicated.
This meter has been designed and tested according to IEC 61010-1, UL 3111-1
Safety Requirements for Electronic Measuring Apparaturs.
This manual contains information and warnings which must be followed ensure
safe operation and retain the meter in safe condition.
HOLSTER
The meter comes with a snap-on holster that absorbs shocks and protects the meter
from rough handling. you can also hang the meter on your belt for easy viewing while probing
The test leads may be snapped into the holster that allows you to hold both the meter and probe tip with
one hand.
CLEANING
When you clean meter, you use a damp towel or cloth only.
INTERNATIONAL ELECTRICAL SYMBOLS
ELECTRICAL UNITS OF MEASUREMENT
Caution
Volts (V)
Double Insulation (Protection Class)
Amps (A)
Ground
Ohms (
)
Fuse
Hertz (Hz)
Milli (m)
Micro ( )
Capacitance (
)
