I
NSTALLATION
1. Select the Site - Choose a proper place for
your SMC2682W Wireless Bridge. In
general, the best location is at the center of
your wireless coverage area, within line of
sight to all wireless devices.
2. Attach the Antenna - Screw the antenna into
the antenna connector (ANTENNA) on the
back panel. Proper placement will improve
performance. Try to place the Bridge in a
position that can best cover its BSS (refer to
page 13). Normally, the higher you place
the antenna, the better the performance.
3. Connect the Ethernet Cable - The
SMC2682W can be wired to a 10 BASE-T
Ethernet with a network device such as a
hub or a switch.Connect into the RJ-45
connector socket on the back panel with
category 3, 4 or 5 UTP Ethernet cable and
an RJ-45 connector.
4. Connect the Power Cable - Connect the
power adapter cable to the 9V DC power
Socket on the rear panel.
Warning
: USE ONLY the power adapter
supplied with the SMC2682W.
Otherwise, the product may be
damaged.
Antenna Connector
RJ-45 Connector
RS-232 Port
Reset Button
DC 9V Power Cable
