T
ROUBLESHOOTING
Check the following items before you contact
SMC Technical Support.
1. If mobile users do not have roaming access
to the SMC2682W Wireless Bridge Master,
check the following:
Make sure that all the SMC2682Ws and
wireless devices in the ESS in which the
WLAN mobile users can roam are
configured to the same WEP setting,
SSID and authentication algorithm.
2. If the SMC2682W cannot be configured
using the web browser:
Remove power from the SMC2682W.
Push in the reset button located on the
back of the SMC2682W.
While holding in the button, apply
power to the Wireless Bridge.
Wait until both the wireless Activity
LED, and the wireless Link LED both
start to flash on and off together. (about
5 seconds)
Release the Push Button and the LEDs
will turn off. You are now in the Control
Mode.
Select the desired function by pressing
the reset button (Note: hold the button
until the LEDs change to the next
configuration).
The function changes to the next in
sequence every time the Push Button is
pressed. The pattern repeats (Function: 0,
1,2,3,0,1,2,3,0,...) as the Push Button is
pressed repeatedly.
