C
ONFIGURATION
The diskette labeled Utility Diskette that
comes with the package contains a utility
program for the EZ Connect Wireless Bridge.
Any updates can be downloaded from SMCs
Web site at
http://www.smc.com.
Warning:
Back up your utility diskette and use
the copy as the working diskette to
protect the original from accidental
damage.
The SMC2682W can be configured over an
Ethernet network using RJ-45 cable. You may
connect the SMC2682W to a network device
such as a hub or switch. Then, run the utility
program, and configure the SMC2682W
remotely as described below.
Windows NT/95/98/2000/ME
Installation
1. Insert the SMC2682W utility disk into the
floppy drive on your PC, and then enter the
following command: A:\utility\setup.
Follow the on-screen instructions to install
the utility program.
2. When you run the installed utility, click on
AP/Bridge and then select Scan from
the menu. The program will then detect all
the SMC2682W Bridges on the network.
