Reset Process (without admin PIN)
This process will reset back to default parameters as listed below
•
Admin PIN to 999999
•
Public unlock PIN to 123456
•
Unlock time to 2 seconds
•
Security mode to No Security
1.
Outdoor station power should be OFF
2.
Temporarily connect the
Exit Button Wire to the
power supply Negative for the system
BLUE
GREY
alternatively if an Exit Button is installed an assistant could hold the button down until the below steps are complete
3.
Turn the outdoor station power adapter to ON
4.
A Bi Bi Bi sound will be heard from the keypad to indicate reset complete
5.
Disconnect blue wire or have the assistant release the exit button exit button.
*
#
9 9 9
9
9
9
#
0
9 9
Reset Process (with admin PIN)
Default PIN is 999999, if the PIN has been changed in the past then use the current PIN
Type 0 to enter the menu
Type 99# to perform the reset
#
* *
Press *, * then # to exit
Down
Up
Unlock the door striker/gate related to the outdoor station
Transfer/
intercom
Call transfer/Internal intercom/Color Contrast
1. Standby mode long press the button start internal intercom
2. During monitor and door station on conversation long press the button transfer call to slave monitor.
3. During conversation or monitoring, short press the button start Colour Contrast.
Monitor Door 1/Cam 1/Door 2/Cam 2
1. Start conversation with door station
2. Monitor monitoring door station, press the button start conversation with door station
3. During conversation, press the button hang up
4. During make menu setting, press the button exit
Unlock the COMMON door striker/gate by press this button
Confirm/Enter into main menu
1. Standby mode press the button to enter main menu
2. Setting parameter press button confirm
3. During talking/monitoring mode, press button start recording/snapshot/stop recording
4. Playing music/video/picture mode, press the button pause/play
5. Playing music/video, long press the button adjust volume
Setting
Monitoring
Unlock
Answer/
Hang up
“+”
“-”
Gate
Unlock
Indicates the intercom is muted from the switch on the side of monitor
Mute
Touch Button Overview
This process will reset back to default parameters as listed below
•
Admin PIN to 999999
•
Public unlock PIN to 123456
•
Unlock time to 2 seconds
•
Security mode to No Security
Page 10
