Document Nr.:
Version:
1.Vers. from date:
1.Version from:
Modified from:
Modified at:
Page Nr.
OSH-Manual-EN
1.3
28.02.2012
A. Schutz
A. Schutz
11.05.2012
10 von
33
After this you have to fasten the screws at the four positions.
6. Plugging the cables
It’s your choice to connect each omniSHAPE with the single power cable EY-SCHUKO-
VDE-1,8m or to connect some omniSHAPES together with the Y-cables. Connecting the
power supply is shown by using the Y-cables.
Do only use Y-cables at up to 10 omniSHAPES in one line
It’s not allowed to use the Y-cables in the countries China, Japan, and Korea
Plug the cables as shown in the pictures. When using the Y-cables, make sure that you have
a cable from you main power supply to the first Y-
cable. It’s not included.
Notice: The DVI input signal must have a resolution of 1920x1080 pixels @ 50Hz / 60Hz.
