Eyevis EYE-LCD-1700-HB-BC User Manual Download Page 21

EYE-LCD-1700/2100-HB-BC

21

2. 

FEATURES

Eyevis‘ new display devices from the EYE-LCD-HB-BC series are portable LCD monitors for professional use in 
outdoor applications. The range offers displays in two different sizes, 17“ and 21“. Both versions feature almost 
the same technical features. The displays provide all necessary connectors and timings for sophisticated use in 
broadcast aplications.
Thanks to the specially coated screen surface and the high brightness of the panel, the brilliant image 
characteristics are also available in critical light conditions. The robust protective housing an the 12 volt 
operation make the devices an ideal solution for preview applications at outdoor broadcast productions.

 )

The special features are as follows :

 

Bezel width of less than 15mm

 

High Brightness for High luminance

 

Portrait and landscape mode possible

 

Control and status request are available from the outside

 

New: Sunlight readable panel solution for high brightness environment

 

VESA compatibility simplifies quick and easy mounting

 

cTEC features guarantee trouble-free operation, prolong lifetime and reduce the cost of ownership

 

Long-term service & support.

 

Protective glass safety class IP 52

 

Perfect for outdoor use

 )

Input Connection Possibilities

 

(HD)SDI 1x BNC (loop-htrough) 

 

1x DVI 

 

1x VGA  

   

     1x D-Sub15 (HD-15)

 

1x S-Video    

     1x Y/C S-Vid

 

1x C-Video    

     1x RCA Cinch

3. 

PACKING AND MEASURES

(Measures and technical values may vary depending on the product version.)

 )

Box Content EYE-LCD-1700/2100-HB-BC

 

1 display unit EYE-LCD-1700/2100-HB-BC

 

1 power cord

 

1 External Power Supply Unit

 

1 user‘s manual

3.1  Way of Packaging

The EYE-LCD display is packed in a carton box. To provide protection during transportation, the EYE-LCD display 
is surrounded with foam.

 )

To unpack

1.  Release the fastening clips
2.  Remove the banding
3.  Take the EYE-LCD-1700/2100-HB-BC out of its shipping carton

Summary of Contents for EYE-LCD-1700-HB-BC



















































Reviews: