EYE-LCD-1700/2100-HB-BC
10
ENGLISH
DEUT
SCH
FRANÇAIS
When the product has been dropped or damaged.
When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that
the product needs servicing.
)
Replacement parts — In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
)
Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks
to ensure that the product is in proper operating condition.
)
Wall mounting — When mounting the product on a wall, be sure to install the product according to the method
recommended by the manufacturer.
)
Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
)
Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the
equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the
precautions below:
Use the specified batteries only.
Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the
instructions in the compartment.
Do not mix old and new batteries.
Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.
Replace an exhausted battery with a new one promptly.
If you will not use the remote control for a long time, remove the batteries.
If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye,
bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that
gets into your eye or your clothing may cause a skin irritation or damage your eye.
)
Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal
injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life
support system, and missile launch control in a weapon system.
)
Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result
in low-temperature burns.
1.2 SAFETY INSTRUCTIONS
)
The TFT color LCD panel used in this monitor is made with the application of high precision technology. However,
there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is
viewed from an acute angle there may be uneven colors or brightness.
)
Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance
of the monitor.
)
Do not display a still picture for a long period, as this could cause a residual image.
)
Never rub or tap the monitor with hard objects.
)
Please understand that eyevis bears no responsibility for errors made during use by the customer or a third party,
nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is
recognized under law.
)
This monitor and its accessories may be upgraded without advance notice.
)
Do not use the monitor where there is a lot of dust, where humidity is high, or where the monitor may come into
contact with oil or steam, as this could lead to fire.
