-
14
-
（
2) Connect hose (bore diameter: 9mm) to
external circulation discharging nozzle,
water-in nozzle, device for cooling
(closing-up style) and etc. Fix the hose
tightly with hose band so that it won’t be
slipped.
（
Hose and hose band are not included.
）
※
Use the hose that has appropriate
withstanding pressure, heat-resistant and
appropriate material, which can not be
soaked in solvent.
Also, the material of hose should not be
bended or squashed when pulling it around
the unit.
Drainage from drain hose for tray
※
Container to catch discharged
water is not included.
Check the tray regularly. Pull the handle of drain
cover softly and pick up the cover to remove it.
Then, drain away the water after removing the
stopcock of the drain hose for tray.
Drain hose for tray
Drain stopcock for tray
Using the unit as an stand-alone low temp. bath
When using the unit as a stand-alone low temp. bath,
Connect bypass hose to discharge and water-in
nozzle. If you turn on circulating pump switch in
this status, stirring will be performed in the bath
and cooling capacity will be worsened.
Fix the hose tightly with hose band so that it won't be
Slipped ( hose and hose band are not included ).
Bypass hose
Drain cover
