EYELA CA-1330 Instruction Manual Download Page 10

Page: 10 / 35

Run
Stop

Pump

Alarm

Refrigerator

Pump

Set

Run/Stop

℃

3-1 Control panel

①

Names and functions of operating portion

②

③

④

⑤

⑥

⑦

⑧
⑨
⑩
⑪

№

Name

Function

①

Power switch

Turns on and off the power.

※

Interlocked with ON/OFF of the service

outlet.

②

Alarm LED

Lights up when alarm happens.

③

Circulation pump LED

Lights up when turning on circulation pump switch.

④

Refrigeration unit LED

Lights up when turning on refrigeration switch.

⑤

Control status indicating

LED

Lights up when the control is on.

⑥

Display

Displays temperature or alarms.

⑦

Run/Stop Key

Starts or stops the control.

⑧

▲

Key

Increases the value of temperature in increments of 1

℃

by one

press at the temperature setting display. The continuous

pressing of key increases the value continuously.

⑨

▼

Key

Decreases the value of temperature in decrements of 1

℃

by one

press at the temperature setting display. The continuous

pressing of key decreases the value continuously.

⑩

Set Key

Changes the display of setting the value and measured value.

At the setting value display, the changed setting value is decided.

At the alarm display, the alarm display is cleared and it changes

to the normal display.

⑪

Pump Key

Turns on or off the circulation pump.

Summary of Contents for CA-1330




































Search results

Summary of Contents for CA-1330

Reviews:

Related manuals for CA-1330

Brands by name

Popular brands

EYELA CA-1330, Instruction Manual

Search results

Summary of Contents for CA-1330

Reviews:

Related manuals for CA-1330

Brands by name

Popular brands