Eyecon 9420 & 9430 Instruction Manual
59
3.9 Login / Scan Out menu
3.
Enter the information for each box:
•
User ID
- Tap the keyboard button and enter the contents of the user’s
barcode. If using barcodes that begin with ‘ID+’, omit this prefix in your
entry.
• User Name
- Tap the keyboard button and enter the User Name
exactly as you would like to have it recorded in the Eyecon’s transaction
table and sent to your pharmacy management system, if your Eyecon
will be interfaced.
• Password
- Tap the keyboard button and enter the Password for this
user. There are no password limitations, so any value entered will be
what the user needs to enter when logging in. Users will only be
prompted to enter a password when accessing the setup mode, not for
filing prescriptions, and ONLY IF
Settings Login
is set to
Required
.
• Access Level
- Tap the down arrow and you
will see a drop down list, shown at right. Select
the level of access you are assigning to this
in
section
3.9.5
to see the restrictions imposed
based on this section for each user. NOTE: at least one user must be
assigned Admin level in order to maintain this menu.
• Allowed to Train Pills
- If this user should be allowed to enter a new
drug, change an existing drug or train pills, tap in the small box next to
the text. A check mark appears when selected.
See the sample screen filled out at right. Tap on
Add User
after all information is entered to save
the information or tap on
Cancel
to exit without
saving the information.
If you add the user, the User table appears
with the new user information added, as
shown at right. Continue adding users as
needed.
To edit any user, select their name and tap
the
Edit
button.
3.9.5 User Access Right Levels
This table defines which Setting menus are accessible for each of the Access Levels
available in the
Editor User
menu.
USER
(Personnel assigned an Access Level of ‘User’ will only be allowed access to
the following Settings menus)