Eyecon 9420 Instruction Manual Download Page 32

Page: 32 / 146

Eyecon 9420 & 9430 Instruction Manual

Settings menu

3.2.7 Allow an Over-Fill

This item lets you enable or disable the ability to

allow an over-fill of an Rx. (While not commonly

done, some pharmacies have requested this

capability. If an overfill is attempted, the user will

be given a warning before the transaction is

recorded.)
Tap your choice and press

to accept the

change or

Cancel

to abort a change. Display

returns to the

General

menu.

3.2.8 Calibrate Platter

This function is used to calibrate and clean the

counting platter viewing area if the count is

unstable.
1.

Remove all foreign objects and clean the

counting platter.

Press the

Calibrate Platter

menu item and

the platter will be automatically calibrated.

Platter Calibration Successful

will be

displayed when the calibration is complete, shown at right.

Press

to return to the

General

menu.

3.2.9 Set Eyecon Device Name

This is used to change the computer name of the Eyecon. Most users should not

change this, however, some IT professionals may opt to customize the name,

depending on their network requirements as the computer name is shown during

various network operations if your Eyecon is connected to a network.
The default name is “EYEC-” followed by a numeric portion of your Eyecon’s serial

number. Any valid computer name can be used, but certain special characters such as

“/” should NOT be used in the name. The name change will take effect after the Eyecon

reboots.
Press

CANCEL

to return to the

General

menu without saving changes or press

save any changes made before returning to the

General

menu.

If the

Error Calibrating Platter!

message appears, clean surface of counting platter

and light diffuser. Try the Calibrate Platter process again.

Summary of Contents for 9420



















































































































































Search results

Summary of Contents for 9420

Reviews:

Eyecon 9420, Instruction Manual, Page: 32 / 146

Search results

Summary of Contents for 9420

Reviews: