3.
If necessary, cut the zip tie holding the twisted pair cables to the TLP 1000TV base.
4.
If necessary, remove the cables from the cable runway in the base.
5.
Remove the four screws holding the hinges to the touchpanel.
NOTE:
The spanner drive screws holding the hinges require a #6 spanner bit or
#6 spanner head screwdriver, which are not provided.
VESA Mounting the TLP 1000TV
1.
Before attaching the VESA mounting kit, remove the base and back of the
TLP 1000TV, as described in the
previous section
.
2.
If necessary, connect the cables and fasten them to the back of the touchpanel with
zip ties.
3.
Attach the small back cover (provided). Fit the bottom catches into the slots on the
bottom of the panel and snap the side catches into place.
4.
Once the base and back have been removed,VESA mount the TLP 1000TV by securing
plate 2 of the Extron LPVM-1 (part number
60-1099-02
) to the four VESA mounting
holes (see the figure below). Follow the instructions provided with the mounting kit.
LPVM-1 Plate 2
Security Screws (4)
Small Back Cover
Figure 47.
VESA Mounting the TLP 1000TV with the LPVM-1
TLP 1000MV and TLP 1000TV • Mounting
46
