Extron electronics SMX System Setup Manual Download Page 42

Page: 42 / 48

Configuration and Control, cont’d

5-6

SMX System MultiMatrix Switchers

• Configuration and Control

Also refer to the

SMX System MultiMatrix Switchers User’s Manual

at www.extron.com.

Configuration page

This page gives access to the following major settings:

System Settings, Passwords, Email Settings and Firmware

Upgrade.
Click in the left column to access each page section.

File Management page

This page allows files to be uploaded and deleted from the

server within the SMX.

Control page

This page has two sections: User Control and Presets.
The User Control section allows, for each plane, the input to

output ties to be set and viewed, input audio gain/attenuation,

and output audio volume settings to be adjusted. Audio and

video signals can be muted or unmuted per output from this

section.
In addition, where DVI boards are installed, EDID

configurations can be set from this page.

SMX Control Web page — User Control

From the Presets section, global and plane presets can be saved

and recalled.
Click in the left column to access each page section.

For full details on using the Web pages refer to the

SMX User's Manual,

available at

www.extron.com.

Summary of Contents for SMX System

















































Search results

Summary of Contents for SMX System

Reviews:

Related manuals for SMX System

Brands by name

Popular brands

Extron electronics SMX System, Setup Manual

Search results

Summary of Contents for SMX System

Reviews:

Related manuals for SMX System

Brands by name

Popular brands