Extron electronics SMX System Setup Manual Download Page 40

Page: 40 / 48

Configuration and Control, cont'd

SMX System MultiMatrix Switchers

• Configuration and Control

5-4

Accessing the HTML Pages

Another way to operate the switcher is via its factory-installed

HTML pages, which are always available and cannot be erased

or overwritten. The switcher’s HTML pages are accessible

through its LAN port, connected via a LAN or WAN, using a

Web browser such as Microsoft

Internet Explorer

. See

page 2-3 for connection information.

If your Ethernet connection to the matrix switcher is

unstable, try turning off the proxy server in your Web

browser. In Microsoft Internet Explorer, click

Tools

Internet Options

Connections

LAN Settings

uncheck the

Use a proxy server...

box, and click

For details on operating the switcher via HTML pages,

refer to the

SMX Users Manual

, chapter 6, “HTML

Operation”

Start the Web browser program.

Click in the browser’s Address field.

Enter the matrix's IP address in the Address field.

192.168.254.254 is the factory-specified address.

Press the keyboard Enter key. The switcher checks to see if

it is password protected.

If the switcher is not password protected

, it displays the

HTML start-up page. The switcher is ready for operation

via HTML remote control.

If the switcher is password protected

, the switcher

displays the Connect to xx.xx.xxx.xx Password page.

A user name entry is not required.

Enter the appropriate administrator or user password in

the

Password

field and click

The switcher displays the HTML start-up page. The

switcher is ready for operation via HTML remote control.

Also refer to the

SMX System MultiMatrix Switchers User’s Manual

at www.extron.com.

Summary of Contents for SMX System

















































Search results

Summary of Contents for SMX System

Reviews:

Related manuals for SMX System

Brands by name

Popular brands

Extron electronics SMX System, Setup Manual

Search results

Summary of Contents for SMX System

Reviews:

Related manuals for SMX System

Brands by name

Popular brands