manualshive.com logo in svg

Extron electronics PowerCage FOX SR HDMI, Manual, Page: 7 / 41

Share
Download
Extron electronics PowerCage FOX SR HDMI Manual Download Page 7

vii

NAV E 101 DTP Encoder • Contents

 

Introduction

............................................................ 1

About this Guide ................................................. 1
About the PowerCage FOX SR HDMI ................. 1

System Compatibility ...................................... 3
Fiber Cable Transmission Modes .................... 3

Features ............................................................. 3

Installation and Operation

 .................................. 4

Mounting the Units ............................................. 4
Connections, Controls, and Indications ............... 5

Making Connections ....................................... 8

PowerCage Front Panel Port, Control, and 

Indicators ........................................................ 11

Operation ......................................................... 13

Remote Control

 ................................................... 14

Serial Ports ....................................................... 14
Simple Instruction Set Control .......................... 14

Host-to-Unit Instructions ............................... 14
Symbol Definitions ........................................ 15
Unit-initiated Messages................................. 16
Error Responses ........................................... 16
Using the Command and Response Table .... 16
Command and Response Table for SIS 

Commands ................................................. 17

Signal Processing Product Control Program 

Control ............................................................ 21

Installing the Software ................................... 21
Starting the Program .................................... 21
Firmware Upgrade ........................................ 26

Reference Information

 ...................................... 31

Installing a Board in the Enclosure .................... 31

Contents

Summary of Contents for PowerCage FOX SR HDMI










































Reviews:

No comments