Command and response table for SIS commands (continued)
PowerCage FOX SR HDMI Scaling Receiver • Remote Control
19
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional description
Test pattern
Output color bars
E
1TEST
}
Test1
]
Set the unit to output the color bars test pattern.
Output grayscale
E
2TEST
}
Test2
]
Set the unit to output the grayscale test pattern.
Output crosshatch
E
3TEST
}
Test3
]
Set the unit to output the crosshatch test pattern.
Output alternating pixels
E
4TEST
}
Test4
]
Set the unit to output the alternating pixels test pattern.
Output crop
E
5TEST
}
Test5
]
Set the unit to output the crop test pattern.
Turn test pattern off
E
0TEST
}
Test0
]
Set the unit to output the input video (no test pattern
is selected).
Show test pattern status
E
TEST
}
X1$]
View the current test pattern.
Memory presets
Save preset
X1#
,
Spr
X1#]
Command code is a comma.
Recall preset
X1#
.
Rpr
X1#]
Command code is a period.
Auto memory
Disable auto memory
E
0AMEM
}
Amem0
]
Enable auto memory
E
1AMEM
}
Amem1
]
Default condition.
Show auto memory status
E
AMEM
}
X1@]
Audio mute
Mute the audio
1Z
Amt1
]
Silence the audio output of the receiver.
Unmute the audio
0Z
Amt0
]
The receiver outputs audio.
Show audio mute status
Z
X1@]
Audio mute status is
X1@
.
Disable and enable return link and daisy chain
Disable return link
66*0*0#
Rle*0*0
]
Disable link 2.
Enable return link to
transmitter
66*0*1#
Rle*0*1
]
Enable link 2 (default setting).
Enable daisy chain
66*0*2#
Rle*0*2
]
Enable receiver daisy chain mode.
Show return link and daisy
chain status
66*0#
0*
X1%]
HDCP notification
Enable notification
E
N1HDCP
}
HdcpN1
]
Default condition.
Disable notification
E
N0HDCP
}
HdcpN0
]
View notification status
E
NHDCP
}
X1@]
Video shutdown delay
NOTES
:
•
The Set Video Delay command delays the digital video to help monitors sync correctly during an input rate change.
•
Only
video is delayed; embedded audio is
not
delayed.
Set delay
3*
X1^
#
Dly
X1^]
Delay video by an interval of
X1^
.
Example:
3*3#
Dly3
]
Delay video by an interval of 0.75 seconds
(3 x 0.25 seconds).
View delay
3#
X1^]
NOTE
:
X1@
= Auto memory, mute, and HDCP notification status
0
= off
1
= on
X1#
= Memory preset number
01
to
30
X1$
= Test pattern
0
= none
3
= crosshatch
1
= color bars
4 = alternating pixels
2
= grayscale
5 = crop
X1%
= Rx link and daisy chain enable
0
= disable both
1
= enable return link
2
= enable daisy chain
X1^
= Video delay
0
= 0 second
(0 plus six steps at 0.25 seconds per step)
1
= 0.25 second
3
= 0.75 second
5
= 1.25 second
2
= 0.5 second*
4
= 1.0 second
6
= 1.5 second
* = default
Change to output rate change
Summary of Contents for PowerCage FOX SR HDMI
Page 6: ......