PowerCage FOX SR HDMI Scaling Receiver • Remote Control
28
NOTE
:
If the Firmware Loader button does not appear on the tool bar, the Firmware
Loader software is not installed. Install it as follows:
a.
On the Extron website, click the
Download
tab.
b.
On the Download Center page, click
Software
on the left sidebar
menu.
c.
Locate the “Firmware Loader” line and click the
Download
link at the far
right.
d.
Follow the instructions on the download screens to save the installer file
to your computer.
e.
In Windows Explorer or another file browser, locate the Firmware
Loader executable file in the file system on your computer and double-
click it to open it.
f.
Follow the instructions on the Installation Wizard screens to install the
Firmware Loader on your computer. Unless you specify otherwise, the
installer program places the Firmware Loader file, “FWLoader.exe” in
C:\Program Files\Extron\FWLoader
.
If the Extron and FWLoader folders do not yet exist in your Program
Files folder, the installer creates them.
2.
If you have not previously updated firmware for the PowerCage FOX unit, on the Add
Device screen (see figure
20
), select the
RS-232
tab.
Figure 20.
Add Device Screen
If you have previously updated firmware for this model, click
Cancel
. The Firmware
Loader window appears. Proceed to step
5
.
NOTE
:
The receiver does not have an Ethernet port. Do not select
TCP/IP
.
3.
From the drop-down menus on the RS-232 screen, select the appropriate Com port
number and baud rate (the default is 9600).
4.
Click
OK
. The Firmware Loader window appears (see figure
21
).
Summary of Contents for PowerCage FOX SR HDMI
Page 6: ......