FOXBOX Tx/Rx HDMI • Introduction
4
Features
•
Ultra high performance
— Offers pixel-for-pixel HDMI or DVI-D (with an adapter)
video transmission, up to 1920 x 1200 at 60 Hz (in Plus mode) or 1600 x 1200 at 60 Hz
(in non-plus mode).
•
Video input
— The transmitter accepts a single link of HDMI or DVI-D video.
•
Loop-through on transmitter
— The transmitter has an HDMI loop-through on a
HDMI connector that allows connection of a local monitor.
•
EDID emulation mode (Display Data Channel [DDC])
— The FOXBOX Tx HDMI
transmitter provides a selector switch for specifying the rate of the incoming digital video
signal. EDID emulation mode allows proper operation when no local monitor is present.
•
Video output
— The receiver outputs a single link of HDMI video.
•
Extron fiber optic product compatibility
— Enables ultra-long distance
HDMI-to-analog RGB and analog RGB-to-HDMI conversion without the need for extra
signal conversion devices.
•
Compatibility with FOX 500 DA6 distribution amplifier and FOX Matrix Switchers
•
Analog audio input
— The transmitters accept an unbalanced stereo or mono audio
input on a 3.5 mm mini jack.
•
Analog audio input gain/attenuation
— The input audio level of the analog audio can
be adjusted within a range of -18 dB (attenuation) to +10 dB (gain) via the RS-232 link.
•
Analog audio output
— The receiver outputs balanced or unbalanced stereo audio on
a 5-pole captive screw connector and digital audio embedded in the HDMI output.
•
Links monitoring
— The panels of the transmitter and receiver have indicators for
monitoring image and audio transmission and both fiber optic links.
•
Loss-of-light alarms
— The panels of the transmitters and receivers have discrete
outputs that indicate if either of the fiber optic links have suffered a loss of the light
signal.
•
FOX Extenders Control Program
— For RS-232 remote control from a PC, the
Extron FOX Extenders Control Program, which runs under Microsoft® Windows®,
provides a graphical interface and drag-and-drop/point-and-click operation.
•
Simple Instruction Set
— The transmitter and receiver use the SIS for easy remote
control operation.
•
Analog audio level
— The analog audio output is at the consumer level (-10 dBV).
•
Upgradable firmware
— The firmware that controls the operation of each unit can be
upgraded in the field via an RS-232 link without taking the unit out of service. Firmware
upgrades are available for download on the Extron Web site,
www.extron.com
, and
they can be installed using the FOX Extenders Control Program.
•
Memory presets
— 30 memory presets are a time-saving feature that lets you store
input size and position settings relative to a specific input resolution. You can then recall
those settings, when needed, using the SIS or the control software.
•
Rack mounting
— Both FOXBOX HDMI units are rack mountable in any conventional
19-inch wide rack, using an Extron 9.5-inch or 6-inch deep rack shelf.
•
Power
— The 100 VAC to 240 VAC, 50-60 Hz external power supply for each unit
provides worldwide power compatibility.
Summary of Contents for FOXBOX Rx HDMI
Page 6: ......
