Extron electronics FOX 4G Matrix 14400, User Manual

Page: 55 / 105

Matrix Software, cont’d
FOX 4G Matrix 14400 Switcher • Matrix Software
4-12
Updating firmware
The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher’s control board without taking the switcher out of service.
Update the switcher firmware as follows:
1 . Visit the Extron Web site, www.extron.com , click the Download tab, and then
click the Firmware link (figure 4-9).
3
2
3
1
This sequence is shown for
example only.
For the FOX 4G Matrix 14400,
the firmware file selected and
shown is “FOX 4G Matrix 14400”.
NOTE
1
Figure 4-9 — Location of firmware upgrade files
2 . Select the appropriate firmware file (FOX 4G Matrix 14400) to download and
click
Download
.
3 . Enter the requested personal information and then click
Download
to copy the
firmware to your computer.
4 . Click Run on the next two screens (figure 4-10 on the next page). The PC
downloads the firmware update from the Extron Web site and starts the
Extron Installation Program to extract the firmware file.
5 . Click Next . The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
N Note the folder to which the firmware file is saved.
6 . Click Finish to exit the program.