Extron electronics FOX 4G Matrix 14400, User Manual

Page: 37 / 105

Programmer’s Guide, cont’d
FOX 4G Matrix 14400 Switcher • Programmer’s Guide
3-12
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, mutes, and presets
N
The & tie all command and % tie all command can be used interchangeably.
View output tie
X@
&
X!]
Example:
15&
27
]
Input 27 is tied to output 15.
View output tie
X@
%
X!]
Example: 7%
02
]
Input 2 is tied to output 7.
View output mutes
E
VM
} X$
1 ,
X$
2 , ...
X$
n
]
Each
X$
response is the mute
status of an output, starting
from output 1.
n is the
highest-numbered installed
output.
N The switcher reports the mute status for only as many outputs as are supported by the highest numbered slot with an
I/O board installed. The switcher does not recognize gaps in the board installation. For example, if boards are installed,
in only slots 1 and 3, leaving slot 2 empty, the switcher returns mute status for 48 sequential outputs. The mute status
for the outputs supported by the board in slot 3, inputs 17 through 32, are all can be ones or zeroes (the switcher allows
you to mute an output that is not installed, so long as it is numbered lower than the highest numbered output installed).
View global preset
configuration
EX%
*
X@
*1VC
}
X!
n
•
X!
n
+1
•...•
X!
n
+15
•Vid
]
Show preset
X%
’s
configuration. Show the
input tied to 16 sequential
outputs, starting from
output
X@
. n is the starting
output number.
Command description:
Response description:
preset # (
X%
)*starting output # (
X@
)* 1VC
input # (
X!
) tied to
X@
•
X!
tied to
X@
+1•
X!
tied to
X@
+2• ... •
X!
tied to
X@
+15• Vid
]
Example (32 x 32 matrix) :
E
23*25*1VC
}
25 Output:
Response = tied input:
input 2 tied to output 27
26 27 28 29 30 31 32
08•08•02•08•08•01•00•00
no tied input
input 8 tied to output 28
•--•--•--•--•--•--•--•--•
37 38 39 40 33 34 35 36
outputs do not exist
•V id
Each position shown in the response is an output: left = output 1, right = output 16.
(Outputs 9 through 16 are not present on this Matrix 14400.) The number in each position
is the input tied to that output.
In this example, video input 8 is tied to outputs 25, 26, 28, and 29; input 2 is tied to
output 27; and input 1 is tied to output 30. No inputs are tied to outputs 31 and 32.
N
EX%
*1*1VC
}
where
X%
= 0 returns the switcher’s current video configuration.
View room preset
configuration
EX^
*
X*
*
X@
*1VC
}
X!
n
•
X!
n
+1
•...•
X!
n
+15
•Vid
]
Show room
X^
, preset
X*
’s
configuration. Show the
input tied to up to 16 outputs
assigned to room
X^
. n is the
starting output number.
Command description:
Response description:
room # (
X^
)*room preset # (
X*
)*starting output # (
X@
)* 1VC
input # (
X!
) tied to
X@
•
X!
tied to
X@
+1•
X!
tied to
X@
+2• ... •
X!
tied to
X@
+15• Vid
]
N
X@
= Output number 001 – 144
X!
= Input number 000 – 144 (000 = untied)
X$
= Mute 0 = not muted, 1 = muted
X%
= Global preset # 000 – 064 (000 = current configuration)
X^
= Room # (for room presets) 10 max. (Each can have up to 10 presets (
X*
s) assigned.)
X*
= Room preset # 00 – 10 (00 = current configuration for room)