Input
x
:
Gain/Attenuation
— Select this option (see
,
on the previous
page) to set the gain and attenuation for analog audio inputs (the range is -18 dB to
+12 dB).
NOTE:
For analog inputs TRS1, TRS2, and TRS3, or for digital auto modes only
Example of audio setup using an Extron Cable Cubby
•
The Extron Cable Cubby has three video inputs (composite, RGB, and HDMI) that are
connected to the DSC 301 HD, inputs 1 through 3.
•
A single 3.5 mm TRS audio cable is connected to the analog TRS 3 input on the
DSC 301 HD.
•
Configure input 1 and input 2 to use audio from the analog TRS 3 input.
•
Configure input 3 to LPCM-2Ch Auto to use digital audio when present, or when not
present, to use analog TRS 3.
Advanced submenu
This submenu allows you to configure the global settings for the unit (see figure 11).
1
2
3
4
5
6
7
8
Figure 11.
OSD Menu — Advanced Submenu
Test
Pattern
— Select this option (
1
) to use a test pattern during the setup of the
system and checking the display device. Test pattern options are:
ALT PIXELS
COLOR BARS (8)
CROP
GRAYSCALE
CROSSH TCH
BLUE MODE
AUDIO TEST
A
Figure 12.
Test Pattern Options
DSC 301 HD • Operation
16
Summary of Contents for DSC 301 HD
Page 6: ......
Page 8: ...DSC 301 HD Contents iii...
