Extron electronics DSC 301 HD, User Manual

Page: 16 / 75

Operation
This section of the manual discusses the operation of a DSC 301 HD device, and is
divided into the following sections:
•
Front Panel Overview
• DSC 301 HD Menu System — Configuration and Adjustments
• Front Panel Lockout (Executive Modes)
Front Panel Overview
ADJUST
DSC 301 HD
CONFIG
1 3 2
HDCP
MENU ENTER
INPUT
OUTPUT
Extron
ADJUST
DSC 301 HD
CONFIG
1 3 2
HDCP
MENU ENTER
INPUT
OUTPUT
Extron
A
B
C
D
E F
Figure 3. DSC 301 HD Front Panel Features
A
Status LED (power and signal)
— This LED lights amber when power is present
but no signal is detected, and green when power and signal are both present.
B
USB mini-B configuration port — Connect a computer to this USB mini-B port for
device configuration, control, and firmware upgrades.
C
Input selection buttons and LEDs (1-3) —
• Input LEDs — The LED of the selected input lights when the button is pressed.
•
Input 1 (composite video input button)
— Input 1 selects the composite video
input.
•
Input 2 (configurable input button) — Input 2 selects the RGB (RGBHV,
RGBS) or YUV (YUV-HD, YUVp, YUVi) input.
• Input 3 (HDMI/DVI button) — Input 3 selects the HDMI or DVI input signal.
D
HDCP content LEDs — These LEDs indicate HDCP status for inputs and output
• Light green when the input or connected display is HDCP encrypted.
• Remain unlit when the current input or HDMI output is not HDCP encrypted.
• Blink amber when the video output has been disabled (such as when in sync
mute or screen saver mode).
E
Menu Navigation buttons (Menu and Enter) —
• Menu — Press this button to access and move through the OSD menu system.
• Enter — Press this button to step through the OSD submenus (see the
DSC 301 HD OSD Menu System — Configuration and Adjustments
section
on the next page).
F
Adjustment knobs (horizontal
[
and vertical
{
) — When using the menu
system, rotate either of these two knobs to scroll through the menu options and to
make any adjustments.
DSC 301 HD • Operation 8