Extron electronics DA 2HD 4K PLUS, User Manual

Page: 36 / 42

X1) — Verbose mode (default =
1
)
0
= Clear or none.
1
= Verbose mode.
2
= Tagged responses for queries.
3
= Verbose mode and tagged responses for queries.
X1!
— TMDS output format (default =
0
)
1
= Auto, pass through if HDMI sink; force DVI format if DVI sink.
2
= DVI RGB 4:4:4 Full
3
= HDMI RGB 4:4:4 Full
4
= HDMI RGB 4:4:4 Limited
5
= HDMI YUV 4:4:4 Limited
6
= HDMI YUV 4:2:2 Limited
X1@ — Video mute (default =
0
)
0
= Video mute disabled.
1
= Video mute (TMDS).
2
= Video and sync mute.
X1#
— Input HDCP status
0
= No source detected.
1
= Source detected with HDCP.*
2
= Source detected without HDCP.*
*Active source detection based on PLL clock or TMDS lock (not solely based on
+5VDC presence).
X1$
— Output HDCP Status
0
= No active sink connected.**
1
= HDCP sink detected.
2
= Sink detected without HDCP.
**For active sink, it needs to have hotplug detect and TMDS termination (monitor
sense).
X1%
— 5V output hot‑plug mode
0
= Auto ( 5V enabled when source with 5V is present, otherwise Off).
1
= 5V always enabled (default).
Error Messages
E01 — Invalid input channel number (too large)
E10 — Invalid command
E13 — Invalid value
DA HD 4K PLUS Series • SIS Commands 28