Extron electronics DA 2HD 4K PLUS, User Manual

Page: 13 / 42

Installation
This section provides an overview of the installation of the DA HD 4K PLUS Series
distribution amplifiers, including the front panel and rear panel connections. Follow the
links for more detailed information elsewhere in the guide.
This section provides the following information:
• Installation Overview
• Rear Panel Connections
• Front Panel Features
Installation Overview
To install and set up the DA HD 4K PLUS Series distribution amplifiers, follow these
instructions:
1. Mount the unit in a suitable location (see Mounting on page 33).
2. Connect power to the unit:
•
DA2 HD 4K PLUS — Connect the provided 12 VDC power supply to the power
inlet (see Connecting Power on page 6).
ATTENTION:
•
Do not connect any external power supplies until you have read the
Attention notifications on page 7.
• Ne branchez pas de sources d’alimentation externes avant d’avoir lu les
mises en garde sur la page 7 .
•
DA4 HD 4K PLUS and DA6 HD 4K PLUS — Connect to a 100‑240 VAC
(50/60 Hz) power source using the provided IEC power cord (see IEC cable
connector on page 8).
3. Connect the output display devices and power them on (see Connecting Output
Displays on page 9).
NOTES:
• The distribution amplifier automatically reads and stores EDID from the
selected display device.
• By default, 1080p @ 60 Hz with 2‑Channel audio native resolution EDID is
assigned. For other EDID options, see
EDID Minder on page 21.
4. If configuration or control using SIS commands is required (see SIS Commands
starting on page 26), connect a control PC to the rear panel RS‑232, 3‑pole
captive screw port (see
Connecting RS-232 Control (Optional) on page 10) or
the front panel USB port (see Connecting to Front Panel USB Port on page 12).
5. Connect and power on the input device (see Connecting Input Source on
page 8).
NOTE: Secure the input and output connectors to the distribution amplifier with the
provided LockIt HDMI lacing bracket (see Securing the HDMI Connector on
page 9 .
DA HD 4K PLUS Series • Installation 5