4-21
SMX System Multimatrix Switcher • Programmer’s Guide
PRELIMINAR
Y
Command
ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Set verbose mode
E
X6#
CV
}
Vrb
X6#]
Enable or disable verbose
mode and/or tagged
responses, where additional
information is provided in
response to a query.
N
The SMX can send out unsolicited information (such as a notice of a change in input or some other setting). This is
a verbose (wordy) relationship between the switcher and a connected device. For a direct RS-232/422 connection, the
SMX is set for verbose mode by default. When the SMX is connected via Ethernet, verbose mode is disabled by default
in order to reduce the amount of communication traffic on the network. If you want to use verbose mode with a switcher
connected via Ethernet, you must set this mode to On each time you reconnect to the SMX.
View verbose mode
E
CV
}
X6#]
Show verbose mode/tagged
response status
X6#
:
Where: 0 = neither verbose mode nor tagged responses enabled, 1 = verbose mode enabled; no tagged responses (default)
2 = tagged responses enabled - verbose mode not enabled, 3 = both verbose mode and tagged responses enabled
Set mail server IP,
unit domain name
EX5^
,
X5&
,
X7$
,
X7$
CM
}
Ipm•
X5^
,
X5&
,
X7$
,
X7$
,
] X7$
= Password(12 digits,
user, admin)
N
Password is optional. If no password is being used, type
EX5^
,
X5&
CM
]
.
Read mail server IP,
domain name
E
CM
}
X5^
,
X5&
,
X7$
,
X7$
,
]
Set e-mail recipient
EX8@
,
X8!
CR
}
Ipr
X8@
,
X8!
,
]
Read e-mail recipient
EX8@
CR
}
X8!
,
]
Show e-mail recipient
address
X8!
.
Set E-mail events for
recipient
EX8#X8@
,
X9)
,
X8$
,
X8%
EM
}
X8!
Ipe
X8#
,
X8@
*
X8$
*
X8%
...
X8%]
Example:
E
I65,02,00,2EM
}
02IpeI65*00*2222222222222222
]
View E-mail events for
recipient
EX8#X8@
,
X9)
,
X8$
EM
}
X8%X8%X8%
...
X8%]
N
X5^
= IP/Gateway address: ###.###.###.### (
server IP address)
X5&
= E-mail domain name (e.g extron.com)
X6#
= Verbose mode: 0 = Clear/none (default for Telnet connection): 1 = Verbose mode (default for RS-232/
RS-422 connection), 2 = Tagged responses for queries, 3 = Verbose mode and tagged for queries
X7$
= Password: 12 digits, alphanumeric, user, admin.
X8!
= E-mail recipient address
X8@
= E-mail Account, 65 to 72
X8#
= Notification Selection 1, I (inputs), F (fans), P (power supply)
X8$
= Notification Selection 2; If
X8#
= I then
X8$
= 00 (all inputs), or 1 to 16, If
X8#
= F then
X8$
= 00 (both fans),
or 01 (fan 1), or 02 (fan 2), If
X8#
= P then
X8$
= 00 (both power supplies), or 01 (PS 1), or 02 (PS 2)
X8%
= Notify when ? 0 = No response, 1 = Fail/Missing, 2 = Fixed/Restored, 3 = Both 1 and 2, 4 = suspend,
5 = Un-suspend.
X9)
= Slot address, 00 (for F and P), 01 to 10 (for I)
Command/response table for IP SIS commands (continued)
