Operation and Setup, cont’d
SMX System MultiMatrix Switchers • Operation and Setup
3-8
4
.
Press and release the blinking Enter button (see figure 3-8). The two ties are
removed, and all button lights extinguish.
Step 3.
Press and release Output #’s 4 and 7 (blinks).
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Enter button also blinks (
green
).
ENTER
Step 4.
Press and release the
Enter button to remove ties.
All buttons extinguish.
C O N T R O L
PRESET
ESC
VIEW
Figure 3-8 — Removing ties - an example; steps 3 and 4
Replacing ties
An input tied to an output can be replaced with another input, as long as that input
is of a similar type or plane (e.g., video for video and audio for audio).
An example of replacing an existing tied input with another input
In the following example, video plane 0’s input 2 is tied to output 1, 4, and 8. Input
2’s signal to outputs 1 is to be replaced by input 7’s signal, also on plane 0, and
already tied to outputs 3 and 6.
1
.
Press and release plane button #0 (lights
green
). Input button #1 lights,
indicating plane signal type, green for video, red for audio, amber for both.
2
.
Press and release Input button #7 (lights). Tied outputs (#’s 3 and 6) light the
same color (as the input button). Input #1 extinguishes.
3
.
Press and release output #1 button. This button blinks the same color as the
input button, and the Enter button blinks
green
. The other tied buttons (#’s 3
and 6) remain lit (see figure 3-13).
Step 1.
Press and release the I/O Plane 0 button. It lights
green.
I/O PLANE SELECT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0
Input button #1 lights
green
(
video
plane),
red
(
audio
plane), or
amber
(video and audio plane).
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Step 2.
Press Input button 7 (lights).
Output #’s 3 and 6 light the same color as the input 7 button. Input 1 extinguishes
Step 3.
Press and release Output #1 button (blinks).
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Enter blinks (
green
).
ENTER
Step 4.
Press and release Enter
All buttons extinguish.
C O N T R O L
PRESET
ESC
VIEW
Input 2 is tied to output #’s 1, 4, and 8 (all lit)
.
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Figure 3-9 — Replacing ties — an example
4
.
Press and release the Enter button. All button lights extinguish.
