Extreme Networks BlackDiamond 8806, Hardware Installation Manual

Page: 54 / 200

Power Supply Units for BlackDiamond 8800 Series Switches
BlackDiamond 8800 Series Switches Hardware Installation Guide
54
Extreme Networks 700/1200 W AC PSU
Figure 33 shows the Extreme Networks 700/1200 W AC UL-listed accessory power supply unit
(Model number 60020/PS 2336). The power supply bay in a BlackDiamond 8800 series switch can
accommodate up to six hot-swappable Extreme Networks 700/1200 W AC PSUs.
Figure 33: Extreme Networks 700/1200 W AC PSU
The front panel on each 700/1200 W AC PSU provides a handle for insertion and removal of the unit.
Two cooling fans draw air in through the front vents on the PSU and exhaust the air through the rear
vents of the switch. Airflow through the PSU is independent from the airflow through the rest of the
switch.
The AC input connection is located on the switch directly below each installed power supply.
NOTE
In a BlackDiamond 8806 system, the Extreme Networks 700W/1200 W AC PSU can be used with an Extreme
Networks 600/900 W AC PSU in the same chassis.
Extreme Networks does not recommended using the 700/1200 W AC PSU with an Extreme Networks 1200W DC
PSU in the same BlackDiamond 8800 series switch.
WARNING!
Field operators must not attempt to open the 700/1200 W AC PSU enclosure for any reason; the PSU does not
contain user-serviceable parts. In the event of failure, return the defective 700/1200 W AC PSU to Extreme
Networks for repair or replacement.
EX_015