Extreme Networks BlackDiamond 8806, Hardware Installation Manual

Page: 29 / 200

BlackDiamond 8800 Series Switches Hardware Installation Guide
29
10G4X I/O Module
The 10G4X I/O module ( Figure 13 ) has four unpopulated XENPAK-based 10 Gigabit Ethernet ports.
NOTE
The 10G4X module is not compatible with the 8900-G96Tc module. If a 10G4X module and an 8900-G96Tc
module are installed in the same chassis, only one of these modules will function.
Figure 13: 10G4X I/O Module
In the default configuration of the 10G4X I/O module, all ports:
●
Are added to the default VLAN as untagged.
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 10G4X I/O module has the following LEDs:
●
Module status
●
Module diagnostics
●
Port status
For information about the LEDs and their activity on the 10G4X I/O module, see “I/O Module LEDs”
on page 50 . For information about the XENPAK interfaces, see the Extreme Networks Pluggable Interface
Modules Installation Guide .
Module status LEDs 10 Gbs ports
ASP040A