14
ENGLISH
note For correct operation
Pellet hopper lid
fire door
The following indications must be respected for correct pellet
stove operation:
Both during the functioning and when the stove is not in use,
all the machine doors (pellet hopper, fire door, ash drawer) must
always remain closed. The machine doors can only be opened
for the time required to load the pellet and for maintenance.
"
CLOSE HOPPER - STOvE DOOR
"
This indication means that you have 60" to close the hatch/door
and the pellet lid.
If not, during ignition the stove will go into "DEPR ALARM
"
mode,
while during normal operation the stove will go into "COOLInG -
WAITInG TIME
"
mode and then re-start automatically when the
correct conditions are present (stove cold, etc.).
stove positioning
To ensure the stove works correctly, it should always be positioned so that it is perfectly level, using a spirit level.
rearMing
The figure below shows the rearm position. It is recommended
to contact the qualified technician if one of the rearms should be
triggered, so as to verify the cause.
Fuse
If there is no power supply to the stove, check the state of the fuse
located in the box between the stove switch and the power cable
connection.
Summary of Contents for RAFFAELLA IDRO H15
Page 2: ...APPLY TECHNICAL DATA LABEL...
Page 35: ...35...
