114
Figure 5-56
5.9.2
Alarm output
Here is for you to set proper alarm output (Auto/manual/stop).
From Main menu->Advanced->Alarm output, you can see an interface shown as in Figure 5-57
Figure 5-57
Please highlight icon
to select the corresponding alarm output.
After all the setups please click OK button, system goes back to the previous menu.
5.9.3
Alarm Setup
In the main menu, from Setting to Alarm, you can see alarm setup interface. See Figure 5-58.
Alarm in: Here is for you to select channel number.
Event type: There are four types. Local input/network input/IPC external/IPC offline alarm.
Local input alarm: The alarm signal system detects from the alarm input port.
Network input alarm: It is the alarm signal from the network.
IPC external alarm: It is the on-off alarm signal from the front-end device and can
activate the local NVR.
IPC offline alarm: Once you select this item, system can generate an alarm when the
front-end IPC disconnects with the local NVR. The alarm can activate record, PTZ, snap
and etc. The alarm can last until the IPC and the NVR connection resumes.
Summary of Contents for NVR21 Series
