8
PRC20-EU-EN-V1.2 1/13
Modes of Operation
MEASURE (Input) Mode of Operation
1.
Turn the meter ON.
2.
“MEASURE” will appear in the display.
3.
Momentarily press the UNIT button to select °F or °C.
4.
Press and Hold the UNIT button for 1 second to change the thermocouple type (or mV).
5.
Connect the thermocouple to the meter.
6.
Read the measurement on the display.
Note: See the keypad description section to turn CJC on/off.
SOURCE (Output) Mode of Operation
In this mode, the unit can source the equivalent mV value for the temperature and the
thermocouple type selected. The values can be output either manually or stepped from memory
as described earlier.
1.
Turn the meter ON
2.
MEASURE” will appear in the display.
3.
Momentarily press the UNIT button to select °F or °C.
4.
Press and Hold the UNIT button for 1 second to change the thermocouple type (or mV).
5.
Press the “I/O” button to select SOURCE.
6.
Connect the Calibration Cable from the meter to the device to be calibrated.
7. Use
the
arrow
buttons to set the desired output value in the lower display. The upper
display indicates the actual temperature or voltage value being sourced. If the upper display
does not match the set value, check the batteries or the connections to the device being
calibrated.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
