6
PRC20-EU-EN-V1.2 1/13
►
◄
▼
and
▲
BUTTONS
The arrow buttons are used to set the output value in the SOURCE mode.
1.
Select the SOURCE mode
2. Press
the
►
or
◄
button select a digit for adjustment. The blinking underline curser
identifies the digit selected.
3. Press
the
▼
or
▲
button to adjust the value of the digit. Press and Hold the
▼
or
▲
button to
rapidly adjust the value.
SET BUTTON
The SET button is used to manually step through the 5 stored output values.
1.
Select the SOURCE mode
2.
Momentarily press the SET button and the value stored in memory location 01 will be
sourced. “MEM.01” appears in the display.
3.
Each press of the SET button will step through the 5 memory locations.
4.
The arrow buttons can be used to adjust the value in each memory location.
STEP/MEM BUTTON
The STEP/MEM button is used to automatically step through the 5 stored output values. The meter
can be set for a single cycle of the stored values or a continuous cycle.
1.
Select the SOURCE mode
2.
Press and Hold the STEP/MEM button. ”STEPSS” (single cycle) and “STEPSC” (continuous
cycle) will alternately appear in the display. Release the button when the desired mode is
displayed.
3.
In single cycle mode the meter will source the current or voltage displayed in MEM01 for 5
seconds. The meter will then advance to MEM02 for 5 seconds. This will continue through
MEM05 and then step down through the memory locations. The cycle will end when MEM01
has been reached.
4.
In the continuous mode the cycle will continue until manually stopped.
5.
Momentarily press the MEM button to stop the cycle. “END” will briefly appear in the display.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
