USB Server Windows Client Utility
14
Note:
Every board in the network is identified by its IP address. The utility treats each IP
address as unique device. Even if the IP address of the box is modified it treats the same box
as a different device and will pop up a Found New Hardware Wizard.
Continue the Found New Hardware Wizard to install the Virtual USB-over-IP bus driver.
Now the USB Server box appears with changed IP Address under USBIP Admin utility.
Password:
The Password Settings page allows you to change or Enable/Disable password of the USB
Server box. The Password settings page will be as shown below.
Check the Modify box to Enable or Disable password option to the USB Server box.
b).
Upgrade Firmware
The USB Server Firmware can be upgraded remotely using the Firmware upgrade option.
Select the USB server on the Server manager. Right Click on the server and Select Upgrade
Firmware option to upgrade the firmware.