4-Port USB2.0 to Ethernet Adapter (USB Server)
4
To Install the Install Shield, please go to the above folder, double click
the setup program in the folder, follow the instruction of the installer to
complete the installation.
As soon as the utility is installed this application will be placed in the
system tray as shown in the figure below.
Double click the icon on the system tray to view and run the Utility in
the Full screen mode on your client PC.
For the more detail about how to use this Utility, please refer to the PDF
manual file in the same folder on the driver CD.
Note:
Due to the limitation of the USB bus emulation drivers
over IP, NOT all USB Devices were supported. The newest support
list was included in the manual PDF file of
USB IP Admin Software
Utility
on the driver CD.
USBIP Admin tool
