Explorer Group 2005 AVANTE, Owner'S Handbook Manual

Page: 42 / 133

ELECTRIC HEATER - SWITCHING ON
Before switching on, ensure that the fuse
protection for the power supply of the
camp site is sufficient for the selected
power setting (b) (see Technical Data
provided in the Owners Information Pack)
Important: The electric supply cable for
the caravan must be fully unwound with
any excess stored uncoiled to prevent
overheating.
1. To switch on, turn the rotary switch to
the desired output leveI (b).
2. Set rotary control knob (c) to the
desired room temperature.
The thermostat setting on the control
panel (1-9) must be determined
individually depending on the heating
requirement and the size of caravan.
For an average room temperature of
about 23oC, we recommend a thermostat
setting of about 6 - 8.
ELECTRIC HEATER - SWITCHING OFF
Switch the heating system off at the rotary
switch (a).
Please note:
Your Truma Space Heater front is
now attached using 2 screws. These
screws must be removed prior to
removal of the Space Heater front.
These screws can be seen when
looking into the fire through the air
vents.
Equipment Use
Explorer Group 2005 Touring Caravan Handbook
41