11
Cleaning and Care (continued)
6 . Lift burners up and away from gas valve orifice .
7 . Disconnect wire from spark electrode .
8 . Clean venturi of each burner with small bottle brush or compressed air .
9 . Remove all food residue and dirt from burner surface .
10 . Clean any clogged ports with a stiff wire (such as an opened paper clip) .
11 . Inspect burners for any damage (cracks or holes) . If damage is found, replace with new burner(s) from manufacturer .
12 . Re-install burner(s) . Checking to insure that gas valve orifice is correctly positioned inside each burner/venturi tube . Also, check position of spark electrode .
13 . Replace heat plate(s) and cooking grid(s) .
14 . Connect LP gas tank per “Installing LP Gas Tank” section .
15 . Perform leak test per “Checking for Leaks” section .
Cleaning Side Burner
1 . Turn LP gas tank valve to “CLOSED .”
2 . Turn all control knobs clockwise to the “ OFF” position .
Note: A “poof” sound is normal as the last of the gas is burned .
3 . Disconnect LP gas tank per “Disconnecting LP Gas Tank” section .
4 . Remove side burner grid .
5 . Remove burner by removing the screws that secure the burner to the side shelf .
6 . Lift burner up and away from gas valve orifice .
7 . Clean venturi of burner with small bottle brush or compressed air .
8 . Remove all food residue and dirt from burner surface .
9 . Clean any clogged ports with a stiff wire (such as an opened paper clip) .
10 . Inspect burner for any damage (cracks or holes) . If damage is found, replace with new burner from manufacturer .
11 . Re-install burner(s) . Checking to insure that gas valve orifice is correctly positioned inside each burner/venturi tube . Also, check position of spark electrode .
12 . Replace cooking grid(s) .
13 . Connect LP gas tank per “Installing LP Gas Tank” section .
14 . Perform leak test per “Checking for Leaks” section .
Before Storing
1 . Turn LP gas tank valve to “CLOSED .”
2 . Turn all control knobs clockwise to the “ OFF” position .
Note: A “poof” sound is normal as the last of the gas is burned .
3 . Disconnect LP gas tank per “Disconnecting LP Gas Tank” section .
4 . Clean all surfaces .
5 . Lightly coat the burner(s) and cooking grid(s) with cooking oil to prevent excess rusting .
6 . If storing the grill indoors, disconnect the LP tank per “Disconnecting LP Gas Tank” section .
7 . Place the protective cap cover on the LP tank and store the tank outdoors in a well-ventilated area out of direct sunlight .
8 . If storing the grill indoors, cover the grill and store in a cool dry place .
9 . If storing the grill outdoors, cover the grill with a grill cover for protection from the weather .
