26
SunSDR2 PRO User Manual
© 2018 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
Note:
·
An excessive monitoring volume may lead to the positive acoustic connection between the
microphone and headphones and as a result to the self-triggering of the audio path.
·
In CW mode, transceiver always generates monitoring signal, even if the MON button is not
pressed, you use it while working on the air. BUT, if the MON button is not pressed, TX signal
won't be displayed on the panorama. To display your TX CW signal press the MON button.
- Even if the MON button is switched off, it is possible to enable
the following functions from the drop-down menu:
Always enabled MON in SSB f or VAC: if the audio record is transmitted in SSB via VAC,
the self-control will be enabled.
Always enabled MON f or Voice Recorder: if the voice recorder is transmitting the audio
record, the self-control will be enabled.
Don't save drive by band and mode: disables saving of the Drive level per band and mode.
Note:
·
If the checkbox is not set,
Drive level is memorized for the frequency bands and mode types.
Tone level is memorized only for the frequency bands.
5.2
Software transceiver settings
These settings are divided into four logical parts, described below.
5.2.1
Transceiver control panel
Summary of Contents for SunSDR2 Pro
Page 2: ......
