67
SunSDR2 PRO User Manual
© 2018 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
5.3.3.3
Waterfall
On the Wat erf all tab you can see the transceiver's waterfall settings.
·
St op in TX mode - Stop the waterfall in TX mode.
Set the St op in TX mode checkbox to disable the waterfall while transmitting.
·
Level mode - Waterfall bright menu.
Select the bright mode from the list: Automatic, Synchronous.
Automatic mode depends on air signals and set offset in the settings below.
Synchronous mode depends on the set limits of the spectrum amplitude.
·
Of f set t op - Offset input box by the top dB level relatively to signals level.
Set the offset in the Of f set t op box to determine the maximum brightness relatively to the
max signals' levels.
·
Of f set bot t om - Offset input box by the bottom dB level relatively to signals level.
Set the offset in the Of f set bot t om box to determine the minimum brightness relatively to the
min signals' levels.
·
Render mode - waterfall render mode menu: Rainbow, Monochrome, Custom. Select the
required color render of the waterfall, depending on your choice or tasks. In the Custom mode,
you have three colors presets: 1,2,3 and User adjustable mode.
In the User preset there are 6 color markers at maximum. Double click of the left mouse
button on the color marker opens the color menu, double click of the right mouse button on
the color marker delete it. Double click of the left mouse button on the empty space adds the
color marker.
·
Remove f licker - Checkbox to remove the waterfall flickers.
Set the Remove f licker checkbox to get rid of the texture flickers in the waterfall, also it
slightly clears the waterfall from air noises.
·
Rat e - Waterfall movement speed slider.
Set the Rat e slider according to the required waterfall movement speed.
Summary of Contents for SunSDR2 Pro
Page 2: ......
