37
ColibriDDC User Manual
© 2022 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
Note:
·
All settings in this tab are stored in the receiver's energy independent memory.
·
After setting the required values, set/unset checkboxes, press the Write button to save the
settings.
·
To read the current settings state from the memory, press the Read button. Auto-read
happens with every software launch.
Set st at ic I P Address – an input box to enter new IP Address.
New Port – an input box to enter the New Port.
Set I P Address – a button to activate the new values of the IP address and Port.
Net work mode – network mode of the receiver:
St at ic I P – you set a St at ic I P address for the receiver, it always be available via this address.
DHCP server – receiver works in the DHCP server mode and can assign two IP addresses at
max.
DHCP client - receiver works in the DHCP client mode, i.e. its IP address depends on the
network where the receiver is connected.
Summary of Contents for ColibriDDC
Page 2: ......
