Expero Omega SAT, User Manual

Page: 4 / 16

~ 2 ~
SENSOR BYPASS WITH THE HELP OF THE OVERRIDE BUTTON
With the ignition turned OFF press the override button. Watch the system's
LED, its flash will mean that the press has been confirmed. Get out the car,
close the doors and lock the Central Lock with the remote's LOCK button
within 20 seconds. The siren will make a long (0.5 second) confirmation sound
(if this feature is set by installer) to inform you that the system is armed with a
bypassed tilt/shock sensor(s) and the tilt/impact to car's body will not trigger
the alarm.
SENSOR BYPASS WITH THE HELP OF THE IGNITION KEY
Turn the ignition ON and OFF three times. Watch the system LED, its flash will
mean that the third ON/OFF procedure is confirmed. Get out the car, close the
doors and lock the Central Lock with the remote's LOCK button within 20
seconds. The siren will make a long (0.5 second) confirmation sound (if this
feature is set by installer) to inform you that the system is armed with a
bypassed tilt/shock sensor(s) and that tilt/impact to car's body will not trigger
the alarm.
ALARM INTERRUPTION
The system will trigger the alarm if the vehicle's doors, bonnet or luggage
compartment are opened, the ignition is turned ON or the ultrasonic sensor is
triggered. To interrupt the alarming of the system disarm and re-arm it.
DISARMING THE SYSTEM
Press the remote control UNLOCK button once shortly. The vehicle direction
indicators will flash. The system's LED will turn OFF
THE OVERRIDE MODE.
Alarm system override mode is used for cases such as the loss of the remote
control unit, the remote's battery becoming completely discharged or in the
case of the car being repaired. With this mode ON, the alarm system does not
respond to the sensor(s), does not immobilize the engine and does not alarm
(N.B. the system's LED flashes frequently). The override mode can be turned
ON in two ways with the PIN code.