22
MANUGENETOP6xx
Operating Instructions
VER 1.03
Max modules refers to max number of modules can be plugged into the HMI (all slots),
If you are planning to use PLCM03 and PLCM04 (additional serial ports) you will obtain following “COM
- Slot#” association:
•
a module plugged in Slot#1 or into Slot#2 will be COM2,
•
a module plugged in Slot#3 or into Slot#4 will be COM3.
If you are planning to use two PLCM01 (CAN interface) you will obtain following Slot# association:
•
a module plugged in Slot#1 or into Slot#2 will be the CanPort 0,
•
a module plugged in Slot#3 or into Slot#4 will be the CanPort 1.
Below you can find relation between modules and max number of modules that can be used into eTOP600
serie panels, based on their Interface Type:
Module
Application
Max Modules
Interface Type
Bus Extension
connector
PLCM02
KNX
1
Serial
N
PLCM03
Serial RS232
2
Serial
Y
PLCM04
Serial RS485
2
Serial
Y
PLCM06
Profibus DP
1
SPI
N
PLIO06
Compact I/O
2
SPI
N
