18
MANUGENETOP3xx - Version 2.00
© 2018 EXOR International S.p.A. - Subject to change without notice
The serial port is used to communicate with the PLC or with another type of controller.
Different electrical standards are available for the signals in the PLC port connector: RS-232, RS-422, RS-485.
Pin Description
1
GND
2
3
CHA-
4
CHB-
5
6
+5V output
7
CHB+
8
CHA+
9
The serial port is software programmable. Make sure you select the appropriate interface in the program-
ming software.
The communication cable must be chosen for the type of device being connected.
SERIAL PORT
Pin Description
1
GND
2
3
TX
4
RX
5
6
+5V output
7
CTS
8
RTS
9
RS-232
RS-422, RS-485
5 Connections
5.1 Serial Port
